Quote:
Originally Posted by Frank Reiner
The matter of quoting is inevitable; but the sensors are not Hall type, they are simply two-wire, magnetic, inductive pickups, aka VR sensors. There should be conductivity through the two wires.
Fronts: .85 - 2.3 Kohms
Rear: .6 - 1.6 Kohms
|
Correction is due on that one. I was going off the top of my head on a very foggy memory of my abs troubles many years ago.
Bottom line is that you should get some reading of resistance when tested. Likely one of them is very dirty, or an obvious broken wire. Should be pretty easy to track down.