View Single Post
  #7  
Old 01-26-2017, 07:00 PM
97 SL320 97 SL320 is offline
Registered User
 
Join Date: Jan 2012
Posts: 7,534
Here is a trick I use when taking stuck control arm bushing bolts off ( it works great with leaf spring eye bushings )

Make sure the replacement parts will fit.

Torch off the spring eye, the outer portion of the bushing is steel and will be cut off as well.

Scrape off the now flaming rubber, also be sure when torching to stay clear of the bushing, it can spray a random flame of molten rubber like a flame thrower.

With the nut removed, heat the sleeve up a bit and push the bolt through. If this does not work with minimal effort, rotate the bolt until you see a seam on the inner sleeve. Use a sharp chisel to expand the seam and the bolt will pretty much fall out at this point.
Reply With Quote