you guys are probably right. the material is very thin to be leather and there is this hard funny brownish looking foam on the back.

after talking on this yesterday i looked at it again and see where mine has gotten several small nicks that have pulled up and look like little flaps and the material is pulled away from the rectangle also really quite bad. this fabric must be the same stuff they used on the door's upper edge where you lay your forearm on. i've been using leatherique there too.

so it probably is a vinyl so it shouldn't be too hard to get. i remember getting some of this in one of those big fabric shops for the old bronco.

if anybody knows how to get the inside pillar cover off that would be a big help because that will probably be the toughest part of the job.

thanks
craig

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!