View Single Post
Old 03-24-2003, 04:29 PM
afmcorp's Avatar
afmcorp afmcorp is offline
Registered User
Join Date: Jan 2002
Location: NW Indiana LaPorte
Posts: 571

way too easy 2 screws and 1 bolt and it was out. so what's the catch??? only kidding.

looks simple enough. they only glued the inside of the aluminum cover so a little bit of sanding and it should be just fine. i do think however contact cement may be the best for this so you can stretch the material.

i noticed they made a special cut on the belt hole cutout kind of a round finger shape and they glued around the inside of the cutout as well.

i should be able to get this cover material tonite after work so i'll let you know how it comes out.

Thanks Much!

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!
Reply With Quote