No difference in the grand scheme of things but you should assemble the tie rod ends with the same orientation, LH thread to the outside on both assemblies as an example. This ensures when you need to do an adjustment you would turn the sleeves the same direction.

As an example, if you wanted to change the toe-out, you would turn each sleeve a corresponding number of turns in the SAME direction (CW or CCW).

If you have them mixed then a CW direction on one side would have the opposite effect of a CW direction on the other side.

__________________
“Whatever story you're telling, it will be more interesting if, at the end you add, "and then everything burst into flames.”
― Brian P. Cleary, You Oughta Know By Now