Quote:
Originally Posted by dmaglione
Dear Frank. Many many thanks for your kindest help. Maybe is my English not very good. ....I understand the vacuum settings for the shift and has been properly set. Every gear goes up or down correctly.
But when you say the modulator where could be set or adjusted? Today I tried tomfind any other screw to trim but nothing found excepting for the screw inside the vcv. Do you have any pictures where show hot to set the firmnes?
Really. Appreciated your help.
Daniele
|
Please look at the picture that you attached in post #3. The circle on the left is labeled "Modulator Valve". That is also called "Vacuum Modulator". Remove the vacuum line from the modulator. Inside the open end is a screw to adjust the pressure in the transmission.