Quote:
Originally Posted by funola
Remember this trick for the solenoid Phillips head screws:
They are loctited from the factory. Apply heat with a propane torch to where the threads are before putting an impact screwdriver to it. Heat it to approx 500 F, that's the temp where loctite softens. They will come out easily w/o stripping.
|
I will remember that for the NEXT time. It is too late, I already stripped two of the three screws getting them out. I had to drill out the other two. Also, after drilling the heads, the stubs came right out with my fingers. No loctite was evident.