View Single Post
Old 04-01-2003, 11:59 PM
Senior Member
Join Date: Sep 2002
Location: New Jersey, U.S.A.
Posts: 2,398
You can remove the fog light from underneath the bumper. Remove the front encapsulation panel (10 screws). Dis-connect the connector from the fog light and remove the 8mm screws (2) which attach the fog light to the bumper. All this is done from the bottom. It's really very simple. With the assembly removed, just pop off the clips that hold the lens in place and install the new one. BE CAREFUL!!! If the lens is cracked it will probably fall apart when you remove the mounting clips!!! The glass is very thick and sharp!!! Good luck
Reply With Quote