Quote:
Originally Posted by Mike D
I've had a couple of ignition switches come apart. The crimps fail and the switch spreads to the point where it doesn't make contact in the "start" position but does at the "run" due to wider contacts.
I'd check the wiring harness to ensure the NSS jumper is in place. On the LH frame rail, in front of the master cylinder.
|
Is NSS the contact plug on the LH Inner fender ? I did clean that one up . Also that's a good idea . On the female harness which connects to the back of the ig switch . I will try crimping in the female clips a little . Good idea .