Quote:
Originally Posted by Mike D
Do you have continuity from the "start" terminal on the starter to the corresponding terminal on the ignition switch?
Multiple postings for the same problem are not helpful.
|
Sorry about that . I figured my old post was burned out .
I don't know . Since I can't get the ignition switch out , all I can do is check the purple trigger wire .
I do have a new ignition switch . But as mentioned . I have not figured out a way to remove the switch from the R of instrument panel . There's a c-clamp . And the key side of the ig switch is in the instr panel . I can't pull it to the R.
On a more positive note . I ran two wires from the starter to and old wooden box . And mounted a toggle switch . Pretty smooth with that deal .