I need to replace the shifter bushing, the one near the transmission. I've read the posts where I need to drop the assembly or lever so I can replace the bushing on the workbench. I've gone under the car and I concur with that assessment.
However, I cannot figure out how to drop the "assembly". I've read where a 10mm bolt must be removed. I have removed one 10mm bolt but what I think is the assembly won't budge leading me to think that another bolt is somewhere else. Please advise as descriptively and verbosely as possible on how to remove the "assembly" (please describe what this assembly is, I'm only guessing at this point). Thanks.
P.S. I've replaced the bushing near the shifter before already