View Single Post
  #2  
Old 04-05-2003, 08:54 PM
ILUVMILS's Avatar
ILUVMILS ILUVMILS is offline
Senior Member
 
Join Date: Sep 2002
Posts: 2,486
Hi 96C280, you may have to replace the bushing with the shift lever installed. On the 722.6 transmission, the lever may not un-bolt from the outside. To make the job easier, put the new bushing in some HOT water for a few minutes prior to installation. This makes it pliable, but it's still a pain in the neck to install. Good luck
Reply With Quote