View Single Post
  #4  
Old 01-10-2018, 02:38 PM
Michanus Michanus is offline
Michanus
 
Join Date: Jan 2018
Location: Netherlands
Posts: 53
After that problem i tested the potentiometer after i replaced the waterpump(it was leaking) and the potentiometer was also bad it had dead spots so i ordered a new bosch unit (first i tried aftermarket but i could not set the aftermarket units to 0.6 -0.7 volt.The new bosch unit was set in just 2 minutes

In the picture below you see that the coolant is overfilled because of the waterpump replacement and i overfilled it a bit (later i fixed this)





Reply With Quote