View Single Post
  #8  
Old 01-31-2018, 10:02 PM
Junkman Junkman is offline
Registered User
 
Join Date: Sep 2006
Location: Middle TN
Posts: 3,569
Quote:
Originally Posted by Diesel911 View Post
Not all plastic or plastic looking lines can hold up with warm diesel fuel inside of them.
That's what I was thinking.

I didn't want to have to make standard hose fit and and search for proper clamps if it was easy to find a suitable plastic hose that would simply push on and not leak.

I remember years ago dealing with a gravity feed water system in rural TN. Poly butyl pipe ran along the ground to the holding tank and was used to plump the house. That stuff always leaked. The joint where the male connector was forced into the pipe weakened the pipe wall and it eventually leaked. The leak would either make a mess &/or allow air into the system which would require priming the pump and bleeding the air - pretty inconvenient especially in the winter.
__________________
85SD 240K & stopped counting. 84SD 180,000. Thinking of painting both.
Reply With Quote