Quote:
Originally Posted by Mike D
Unfortunately the M110 block is lacking in threaded ports. There are several clean-out plates on the RH side which can be used with just a bit of engineering.
Attachment 147674
Attachment 147675
Attachment 147676
Attachment 147677
The cavity on the plate I have removed is apx. 1.5" deep. Shouldn't be too much trouble for an engineer to create a replacement plate using a bung as a receiver for the heating element. Hundreds of different elements available in many different configurations.
|
Great info and pictures! Thank you. And yes, I can fabricate a replacement plate with the heating element mounted into the plate. Great idea!