One tip i can tell you is before you remove the snail spring you need to pull the pointer off the spline it runs on . With the odo in your hand lift the pointer over the resting stop anti clockwise. Then on its resting place mark a line in the speedo face with a pencil .Reason is the speed will be out on re fitting if this is not done .You then just put the pointer on the line and push it on firm ,but caerfull . There is a few things that can go on the speedo head pot gears . All through resetting the trip to oooooo on the move. Google this, or look above in HOW TO ARTICLES i may have seen it in there as well
|