Quote:
Originally Posted by Mt2385
its in the front/middle. Basically under the injection pump.
The oiler cooler itself isnt in the way at all.
|
If the Oil Filter is one of those where the Oil Filter change is done from below and the lower housing is steel if you remover the housing and filter would there be more room?
But, lets hope the other post about the Battery Tray works.
I am not sure you Oil Cooler Hose Nuts are the same size as the ones on the W123. But, I used a large crowsfoot wrench 1-1/6 of an inch on the hose nuts.
You cause that on a breaker bar or on extensions.