View Single Post
Old 04-19-2003, 09:16 PM
engatwork's Avatar
engatwork engatwork is offline
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,878
Grab it as close as you can to the bearing mount and move it back and forth perpendicular to the cars direction of travel. If there is much movement just replace it. Pretty straight forward to replace the brgs - do a search. Take a bright light and look REAL close at the flex disk. Look for cracks or missing fasteners and replace as required - good diy'er job. I would not do anything with the u-joint unless it is falling apart. Unfortunately, I learned this the hard way.
Reply With Quote