View Single Post
  #6  
Old 04-20-2003, 09:08 AM
engatwork's Avatar
engatwork engatwork is online now
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,774
Yea, I can't emphasize enough the importance of marking it. Use paint or a center punch/hammer. Do not use a permanent marker because it ain't for this application. After putting mine back together it would start vibrating at 40 mph. Universal joint was not "centered" and I'm sure the splines were off a tooth or two. Driveline Service of Atl did a good job on it.
__________________
Jim
Reply With Quote