Quote:
Originally Posted by Idle
I may be confusing these with 111 bulb holders but I think the biggest problem is they lose their ground connection. Just use an ohmmeter to find the ground pin, and, if you can't find one, there's your trouble.
I just twist a wire around the ground pin and drill a hole in the ground strip or the metal body. Then attache the ground wire with a screw. This gets the ground to all the bulb holders. Also check to see if you are getting a ground through the plug. The connection to the body may need to be cleaned.
|
Thanks Idle! That's just what I was looking for. Everything is good to the plug. I will look at the ground.
Brad