Good tip to know, thanks. The FSM says very little about reinstalling the Spacer Ring. It does mention 2 types of MB sealer to use on the outside lip of the Seal. They are probably nothing exotic. I think I read somewhere that Blue RTV is a good substitute.
While we are at it, what would you recommend using on the Water Pump Gasket, to be used sparingly. Permatex Aviation Form-A-Gasket #3?
Quote:
Originally Posted by 97 SL320
For this type of setup in general, a bit of Permatex Aviation Sealer ( Not Gasket Shellac ) anywhere there is a metal to metal joint that leads from oil to the outside is a good idea. Just be sure to use it sparingly as we don't want it on the sealing lip area. I don't know what the manual suggests.
|