Quote:
Originally Posted by 85 DSEL
Scratching my head here [emoji2957]
How to get the 'keeper' (cover) off the 30mm hub nut? Is it supposed to simply 'pull' off?
Dale
|
Remove the 30 mm nut by bending out the small tab and then rotate nut CCW. Be sure to set the e-brake and if you have a jack stand try setting the ceter of the hub lip right on the jack stand so when you loosen the nut, the stand prevents the wheel carrier from moving up and down. Remove the 6 bolts mounting axle to diff, drop the axle-to-diff end of the shaft, then push axle out.