Quote:
Originally Posted by Tomguy
Below your plastic bin I see subframe mount bolts. Did you just undo the 1 big bolt? The shock nuts are still on. Are those undone from the underside? The entire subframe assembly can come out with the engine on it but it must be 100% unbolted from the body.
|
thx Tomguy.
this link helped.
PeachPartsWiki: DIY 108 Chassis Sub-frame Mounts
1. I've removed the three bolts on each side above subframe but still need to remove the large one.
2. Removed the shock bolts
3. Disconnected sway bar.
4. Removed engine shocks
I'll be working on it tomorrow. I beleive I need to disconnect the:
1. differential
2. driveshaft
3. ebrake
4. disconnect tranny from body
5. and other miscellaneous disconnections that I'm not aware of yet.