View Single Post
  #6  
Old 03-17-2019, 11:39 AM
cornemuse's Avatar
cornemuse cornemuse is offline
red herring
 
Join Date: Sep 2012
Location: Geographly, heaven. Politically, hell.
Posts: 782
Lift the needle over the 'zero' peg, it will come to a 'position' & stop. (the internal spring controlls this). Make a mark under the needle with a pencil, or first put a piece of tape there & mark it. When putting needle back on, align it with this mark, then back over the peg. The drill thing is a neat trick, the above gets you very close first.
__________________
"I applaud your elaborate system of denial"
Reply With Quote