Going to pull my eng/trans from 300SDL...
I'm going to be driving down to Florida in June and thought I could take the old tranny with me to Atlanta and exchange for a refurbish from GermanTransmission and bring it back up.
So, I'll be pulling the engine/tranny from the 300SDL over Memorial weekend. Is there anything I should know about this before I start. It's a 60 mile drive up to the farm where the car is stored, so I'll be taking my own tools, etc. with me. I don't want to get up there and forget something.
__________________
Michael LaFleur
'05 E320 CDI - 86,000 miles
'86 300SDL - 360,000 miles
'85 300SD - 150,000 miles (sold)
'89 190D - 120,000 miles (sold)
'85 300SD - 317,000 miles (sold)
'98 ML320 - 270,000 miles (sold)
'75 300D - 170,000 miles (sold)
'83 Harley Davidson FLTC (Broken again) :-(
'61 Plymouth Valiant - 60k mikes
2004 Papillon (Oliver)
2005 Tzitzu (Griffon)
2009 Welsh Corgi (Buba)
Last edited by mplafleur; 04-28-2003 at 05:49 PM.
|