Quote:
Originally Posted by Alec300SD
...
Also you should be able swap in your direct oil pressure gauge feed line to the oil filter housing on the W126 300SD by removing the sender from the W126 oil filter housing.
...
|
It's not as easy as that. You'll need an adapter to get the correct fitting, which is actually a pain to find...At least in my area. So your better off swapping out the whole housing.
Quote:
Originally Posted by Alec300SD
...
The valve cover mounted throttle linkages might be different as well.
...
|
It's pretty much the same. Except for the linkage going to the firewall.