The major vendors will have the count for each if you look it up whether its peachparts or the haus of autos in arizona.

What I found was that:
1) All or nearly all of the bolts from the head of my om602 2.5 met the FSM guidelines for re-use.
2) I mail ordered a set anyway, and when they came I found that the new bolts had a wider head than the old ones and about all bolts that go into the exterior of the head (about half) wouldn't fit into the close counterbore that the old ones did, so I returned them and talked to the vendor QA.
3) I drove to the MB of buffalo parts counter and ordered a set. They came in, same deal.
4) I bought a cheap bench grinder and and ground the heads down a touch in diameter and finished the job.
5) Did I mention that all or nearly all bolts met criteria for reuse? WTF was I thinking?

__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times

It's hard to

more likely to

concentrate on

have an accident

two things

when you're on

at the same time.

a cell phone.

www.kiva.org It's not like there's anything wrong with feeling good, is there?