1983 300D Turbo - Automatic
Would like someone with a good eye to see if this vacuum setup works or suggestions how to clean it up.
https://i.imgur.com/qPRLPP9.jpg
https://i.imgur.com/bdqAMlj.jpg
https://i.imgur.com/JbNXfdm.jpg
https://i.imgur.com/c6SrciW.jpg
Notes:
-EGR, Vacuum temp sensor are plugged with vacuum caps. 5way on top off valve cover is bypassed.
-Central locks disabled, HVAC disabled.
-Overboost valve: Top port goes to ALDA, bottom port connects to rear of manifold banjo.
-VCV: Top port goes to transmission, bottom port connected with black hose goes to cabin, as a vent.
I’m mainly concerned with the mess above the VCV. There are many 3 way connectors that lead to know where.
I’m getting proper vacuum tho, I believe (I don’t remember the vacuum acronym) 24 vacuum and 16 from transmission.