Thread
:
Linkage failure
View Single Post
#
12
07-11-2019, 04:32 PM
victoriacoffeeroasters
VictoriaCoffeeRoasters
Join Date: Apr 2019
Location: Victoria, TX
Posts: 25
Quote:
Originally Posted by
tangofox007
You might be able to find a rod end bearing that would work. If not a direct fit, a little adaptation might be required.
https://www.grainger.com/category/power-transmission/bearings/spherical-bearings-and-spherical-rod-ends?attrs=Thread+Size%7CM5+x+0.8%7CM6+x+1.0~~Type%7CFemale+Plain&filters=attrs
It's a little unclear as to what, exactly, failed.
I don't know if you can see it clearly in the pictures provided, but it developed a hairline crack. Overtime it must has worked its way down to the thread cavity, allowing the linkage to pull out.
__________________
John V
1979 300D
1980 300SD
victoriacoffeeroasters
View Public Profile
Find all posts by victoriacoffeeroasters