View Single Post
  #2  
Old 05-05-2003, 09:18 PM
Duke2.6 Duke2.6 is offline
Registered User
 
Join Date: Mar 2003
Location: Southern California
Posts: 2,037
Springs are usually required to be installed in a particular orientation due to differences in end design geometry in order to properly fit the spring pockets in the chassis and control arm.

My recommendation would be to spend a dime and call Eibach for confirmation and reasons if it's worth it to you or install them in the recommended manner.

If orientation wasn't important, they wouldn't point it out in the FAQs.

Duke
Reply With Quote