View Single Post
  #2  
Old 05-05-2003, 10:45 PM
MTI's Avatar
MTI MTI is offline
Registered User
 
Join Date: Nov 2002
Location: Scottsdale, Arizona
Posts: 10,626
I assume you mean the clear plastic window portion of the cluster. If so, the window is spot glued along the perimeter of the lens frame. It is possible to use a very sharp blade, like an X-Acto #10 or 11 around the edge to carefully break the welds. If done properly, you can reglue the window back on with a clear sealant. I wouldnt use crazy glue since it might craze or fog the lens.
Reply With Quote