View Single Post
  #4  
Old 09-06-2000, 10:19 PM
mbdoc mbdoc is offline
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
As both previous posts from Benz technicians show, you probably have metal in system from original compressor failure. Many times the flakes of metal do stick in hi-press rubber hose & sometimes in the condensor. FLUSHING doesn't remove this type of debris. The best way to see if there is metal in system is to remove drier & use an exhaust chain cutter to open the drier to see if there is metal from compressor inside of it.

------------------
MERCEDES BENZ MASTER GUILD TECHNICIAN (6 TIMES)
ASE MASTER TECHNICIAN
27 YEARS DEALER M.B. Shopforeman
190E 2.3 16V ITS SCCA racecar

[This message has been edited by M.B.DOC (edited 09-06-2000).]
Reply With Quote