Quote:
Originally Posted by engatwork
Thanks. I typically don't watch video on the computer because the service is so slow. It is a long way to town.
If you were going to be doing this job weekly you could drill plate and use all thread (and a couple nuts) with the socket welded to end of it.
The first time I pulled an injector on one of these using a puller made in China I took a chunk of al out of the valve cover. The made in China puller needed to be modified that I picked up on after the fact.
|
Jeremy had to grind the sides of the puller he ordered, for it to fit into the cavity of the head cover.
"you could drill plate and use all thread (and a couple nuts) with the socket welded to end of it."
Yes that seems like an easier way to do it, and with less equipment. I could see gluing magnets in the end of the extensions to hold the metal plate. With several holes in the plate, the threaded rod could be used for two or more injectors before being moved.