View Single Post
Old 09-24-2000, 09:58 AM
engatwork's Avatar
engatwork engatwork is offline
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,878
While changing the serp. belt on the '95 E320 I just unscrewed the three little screws holding the fan to the fan clutch mechanism to remove the fan for clearance. I noticed what look like a spring type of clip in the center section of the fan clutch assy. It had an arrow indicating a direction - for removal I assume. It was approximately 13 mm wide and about 50 mm long and you could see where some "tabs" were bent down and being held down at both ends. What is this for and what tool do I need to hold the fan clutch while removing? Part number and description and some instructions on how to use would be appreciated.
'95 E320
'97 Honda CRV
Reply With Quote