View Single Post
Old 09-28-2000, 10:57 PM
Wm. Lewallen
Posts: n/a
The Bowden wire that adjusts the trans.control pressure is jammed and will not move This is on a 1982 300D-Turbo and happened after I had replaced the valve cover gasket and was re-connecting the linkage Everything hooked up okay, but the throtle pedal would not move. After disconnecting the Bowden wire from the transmission, The throtle pedal acted normal. Is there someway I can un-jam this connection? I have driven the car with the linkage disconnected, and the car does okay.Bill Lewallen Lexington, Ky.
Reply With Quote