View Single Post
  #2  
Old 06-10-2003, 01:28 PM
HPF
Guest
 
Posts: n/a
Hope this helps. This is for a '97 S420. Should be the same. Got this from Alldata.


Rear Door Replacement of Exterior Door Handle on Rear Door

Door sealing frame
pull out of channel in area of door lock.
Screw (1)
screw out while pressing door handle toward front. Do not remove screw (1); it is secured against falling by a retaining washer.
Door handle (2) with base (3)
move toward front and remove.
Observe installation note!
Door handle (2) with base (3)
install so that actuating lever (arrow) on door handle (4) engages in door lock.
Screw (1)
screw in (6 Nm ).
Door sealing frame
press into channel in area of door lock.

Installation note

Adjust position of door handle on door panelling with screw (5) (Allen wrench WAF 3mm )

Removal, installation

1 Pull door sealing frame out of channel in area of door lock.
2 Screw out screw (arrow) while simultaneously pressing door handle toward front.

NOTE: Do not remove screw, it is secured against falling by a retaining washer.

3 Move door handle toward front out of hinge strap and door lock.
Observe installation note!

4 Install door handle with base so that actuating lever on door handle engages in door lock (arrow).

5 Screw in screw (6 Nm ).
6 Install door sealing frame.
7 Check for proper function.[IMG]img[/IMG] [IMG]/IMG[/IMG]
Reply With Quote