I was taking the head off my '88 300E today. Everything was going pretty well until I tried to remove the three bolts holding the camshaft sprocket to the camshaft. A 4 MM Allen socket is too small and a 5MM is too big. I found a 4.5 MM L shaped Allen wrench, and found it to be slightly too large. To aggravate the situation, these bolts seem to be VERY tight.
Is this an odd size? Any suggestions.
Thanks for any help you can offer,
'01 C Class, Six Speed
'84 Euro 240D, 523K miles
'88 300E 5 Speed
'81 300D Daughter's Car
Over 800,000 miles in