View Single Post
  #5  
Old 06-12-2003, 08:59 AM
gchenel's Avatar
gchenel gchenel is offline
Registered User
 
Join Date: Dec 2002
Posts: 4
sixto

Thanks for the additional explanations. I understand perfectly how to wire this now. AS for the seat back it is fairly simple. First remove the seat cushion, 2 bolts on each side, pry open and it will come off. Once this is done you will see two bolts holding the bottom of the frame on the sliding bar that moves the seat in and out. Remove those....Once this is done disconnet the heated seats if you have them and then get some help, one on each side. You should be able to lift the seat about two inches to ensure it clears the frame and then it should pull right out.

Guy
Reply With Quote