View Single Post
Old 06-14-2003, 07:38 AM
Chaosmosis Chaosmosis is offline
1973 450SL 117.982 107.04
Join Date: Feb 2003
Posts: 53
Too lean

Thanks for the reply Peter,

I was fighting a too rich condition on this so I plugged off the vacuum feed for the climate control and the door locks right at the intake manifold, I upgraded from a points system to a Crane electronic ignition with a photo sensor and then back to points and I get the same symptom, I think you are right and it is now running too lean but the ECU has been moved during the course of working on this so I do not have a good starting point for the ECU , it has about 22 clicks so I set it about midway. So that is about where I am on this right now....
Thanks again
Reply With Quote