View Single Post
Old 06-14-2003, 11:15 AM
coachgeo's Avatar
coachgeo coachgeo is offline
Registered User
Join Date: Jan 2003
Location: TX between Dallas and OK
Posts: 1,793
Originally posted by hihosilver
at the other end of the manifold is a vacuum port that might work better, unless your propane inj. is greater pressure than the turbo, if it is higher pressure than the turbo your boost gage will reflect this. on the plus side if you inj. at the turbo the cooler propane should really help.
Thanx... are you speaking of the bajo bolt or the one below it?

I have already spoke with the designer of the system I'm using and this area is not good for injecting cause it is at the end of the air flow and wont evenly distribute the vaporized gas. BUTTTTTTTTTTTTT

It has other use potential to me if their is a port back there,
AKA --> wastegate controller! Can you give me more detail of where the port you speak of is?

PS... yes, I know they are not vacume ports. and Yes both injectors are greater pressure than the turbo.
"If anyone knows other lessons I need to learn, please tell me. I'm tired of learning them the hard way".
by JerryBro

The Glow Plug Wait: This waiting period is a moment of silence to pay honor to Rudolph Diesel. The longer you own your diesel the more honor you will give him". by SD Blue

My normal daily life; either SNAFUed- Situation Normal... All Fouled Up, or FUBARed- Fouled Up Beyond All Repair

62 UNIMOG Camper w/617 Turbo, 85 300SD daily driver- both powered by blended UCO fuels

Last edited by coachgeo; 06-14-2003 at 11:30 AM.
Reply With Quote