Quote:
Originally Posted by jay_bob
Relay terminal 86 is the + side coil of the relay, not the load.
Relay terminals
86 coil +
85 coil ground
30 contact common
87 normally open contact
87a normally closed contact
|
I’m not sure what to do with this exactly.
I only have so many fuses left, so I’m reluctant to re-create the problem without a strategy. At the moment, engaging the AC compressor is what blows the fuse.
Unfortunately I don’t know enough about that system to understand where it all starts. I think I read the AC dryer has a pressure switch that activates the fan?
No clue.
Which relay would you suggest I remove? If that is indeed the way forward…