View Single Post
  #6  
Old 07-13-2022, 12:09 AM
Diesel911's Avatar
Diesel911 Diesel911 is offline
Registered User
 
Join Date: Sep 2007
Location: Long Beach,CA
Posts: 51,042
The pre-chambers have small holes in the bottom, so it is unlikely any thing got past the-pre-chamber.

You are not doing this. But, if you remove a prechamber while the cylinder head is on the engine you need to have the piston up near the top because as the prechamber is pulled out it peels off the deposits on the outside of the nose of the prechamber and the deposits fall down on top of the piston.

When that happens and the piston is up there close to TDC I took a vacuum cleaner and put that hose end over the glow plug hole and is sucked the deposits right out.

However, on mine the deposits were dry.
__________________
84 300D, 82 Volvo 244Gl Diesel
Reply With Quote