View Single Post
Old 10-16-2000, 12:58 AM
MikeTangas's Avatar
MikeTangas MikeTangas is offline
Senior Member
Join Date: Apr 2000
Location: So. Cal
Posts: 4,430
Your second post is a little unclear as to what you did. Benzmac stated "replace all fuses" sounds like you only looked at all. If the advice is to change them all, then change them all. Quite often the fuse or fuses may look OK, but time and corrosion have taken a toll. And if it turns out not to be fuses, well then you have peace of mind knowing you have good fuses in the block.

Mike Tangas
73 280 SEL 4.5
Reply With Quote