View Single Post
  #3  
Old 10-28-2000, 08:11 PM
BenzoX
Guest
 
Posts: n/a
I can vouch for the shop errors. I had an alarm installed on my 190 and the idiot pulled out the vacuum grommet in the fire wall to run wires into the engine bay for the siren. Then he drilled holes and put two screws in the wheel well to mount that siren. A thought about your problem...if you replaced it with a an aftermarket bulb, it may not work correctly. Sometimes if you do not put in a German bulb it will not work. If you think this may be the cause simply put a bulb made my Osram or Bosch. Good luck


------------------
Rob C
89 190E 2.6
Beige
Reply With Quote