View Single Post
Old 07-28-2003, 12:49 PM
RMauser RMauser is offline
Registered User
Join Date: Sep 2002
Posts: 19
Hi, I drive an '89 260e and also just painted the bumpers myself. To remove the rear bumper, there are actually 10 screws as far as I can recall. There are two along the back edge of the trunk (straight below the license plate region). There are another two below each tail-light assembly. Then there are another two on each side of the trunk (if you look at the bumper from outside, where the bumper comes near the rear wheel wells, this is the general region where they connect). To access these you will have to remove the two trunk-linings that covers each side of the trunk. The trunk really needs to be empty for this as you have to sorta tug (but be careful not to ruin anything) in order to remove them. I will post a picture later when I am home. I hope this helps
Reply With Quote