View Single Post
Old 08-02-2003, 12:25 PM
hs_300e hs_300e is offline
Registered User
Join Date: Apr 2002
Location: Dallas Area
Posts: 382
Once you pry the lower bushing out, use a piece of pipe like Authur mentioned or use a screw driver and carefully knock the upper bushing out.

With the upper bushing out, angle the bolt and push it out. You may have to wiggle the exhaust pipes a little and the bolt will come right out. And you can get the bolt back in the same way (wiggling the exhaust around).

Good luck.
Reply With Quote