View Single Post
Old 11-16-2000, 03:53 PM
Steve190E 2.3 Steve190E 2.3 is offline
Registered User
Join Date: May 1999
Location: Calgary, Alberta, Canada
Posts: 190
I remember on my 190E you would take a voltage at one of the pins at the diagnostic socket with the o2 sensor unplugged. Then you would plug it back in and adjust the allen screw in the center of the air cleaner until it was fluctuateing on both sides of the voltage. Within +/- 0.8 volts. Is this the same?
Reply With Quote