Elliot

thanks much on the info. i'm going to buy one of these puppies today.

took the 72 out around the block (in 2 years since i've owned it) for the first time sunday night. spent several hours just buffing and waxing on sunday. sure was fun!!

thanks
craig

PS i had to replace a bunch of primary wires due to age. the insulation was cracked or missing. this included the + wire to the distributor. what i did was make a hole thru the existing rubber piece. i used the old piece to seal the distributor just like stock. i also used a sealed male/female connection in this wire just in case i ever needed to pull the coil again.

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!