View Single Post
  #2  
Old 08-26-2003, 02:28 PM
Benzwood's Avatar
Benzwood Benzwood is offline
Registered User
 
Join Date: Jun 2002
Posts: 301
Here is the diagram from the parts CD for a 1986-1989 300E.

The part I'm selling is #47 in the diagram. It is for use with cars with a "splash proof enclosure". Otherwise you use parts 5 and 8.

All the other models I looked at do not have an option... this is the only part specified. But again, let me know your exact model/year and I'll look it up.

The part #47 I'm selling comes with #23 installed (a rubber boot that runs along the front), which is $7.50 if purchased separately.

Also needed are part #14 (qty 4) which are anchors for the screws that fit in rectangular holes in your car. It's likely your car has these still attached even if you're missing the cover. I have one extra (used) anchor that I'll include in case you need it.

Finally you need part #17 (qty 4) which are fancy sheet metal screws with a built-in washer. You can buy these from PartsShop for $1.35 each or just use some hardware store replacements. Thread size is not critical with the anchors.
Attached Thumbnails
FS:  NEW Engine Cover for 300E, 300CE, 300TE-engcover.jpg  
__________________
1992 300E Sedan (Sold)
1999 E320 Wagon (Sold)
1995 E320 Sedan
1995 E320 Wagon

Last edited by Benzwood; 08-26-2003 at 02:34 PM.
Reply With Quote