Thread: Car Dusters
View Single Post
Old 05-24-1999, 11:42 PM
Lee Scheeler
Posts: n/a
What you described with the minor swirling is why I do not use any of those dry dusters. If I have to clean the finish without water/soap/washing then I use either #34 or Slick Stuff and a 100% cotton terry. I have achieved the best results by heavily spraying (almost soaking) the area needing to be cleaned with the SS or #34, then gently gliding the terry over the surface using only the weight of the towel as pressure. I then give it one more spray and wipe gently some more. Repeat above steps until you have de-dusted or de-bird crapped the panel your after. I only use the stuff for "in-between" cleaning if I have to.

Hope this helps...Lee
Reply With Quote